Home Decor Dream

Installation of mirrors only with a special double-sided tape and glue yellow does not mean that the mirror can be removed at any time and reused. If you want to replace the mirror with the other coatings, should remove the mirror from the wall at once with the back panel. You also have to adjust to the room design, attention to technical installation, and do not forget to wear safety equipment work.

First, the mirror is only used as a complement when dressing. Its application is framed and hung on the wall. Now, the mirror is widely used to create the illusion of space. A small space seem even larger.

To apply it, a mirror mounted on a large wall area. As posted continuously from floor to ceiling. The process of installation is not complicated. It’s just that tend to mirror fragile and easily broken require extra prudential. To the maximum, there are 7 (seven) things you should consider before installing:

1. Planning a mature design

Do it early in the design plan, as this will affect the type of mirror and installation technique. Determine the location of the mirror, can be on a field full or partial wall.

Mirror mounted on one corner of the room-sized doors can also give the illusion of space behind the wall. Condition, the place furniture next to the glass wall to create a perfect illusion.

A wide field of mirrors can also be modified to make the pieces mirror and compose like a puzzle until it covered the entire wall. Can also be combined with other material suitable design you want.

Specify also, whether the frame or mirror will wear it or not. This will affect the installation techniques used and the thickness of the mirror.

2. Accurate measurement

Carefully measure the wall area to be fitted with mirrors. If the design of the wall is made of pieces of mirror, do not forget to note the size of each piece of mirror. Make sure that when pieces of the mirror had been compiled, was fitted in the wall. The accuracy of these measurements are used also as a guide when ordering and installing mirrors.

3. Choose the right type of mirror

There are two types of mirrors are commonly used for the interior. If you want to give broad effect on the room, use a regular mirror with perfect reflection. If you want a more elegant atmosphere and cozy space, use a bronze mirror. Bronze mirrors that effect is usually combined with warm lighting.

4. Note the thickness of the mirror

The design mirrors that will be installed on the thickness of the mirror effect. Use a mirror thickness of 5 millimeters for the application of a mirror without a frame (frameless) in a wide area. Do not use a thickness below that, because the mirror will be sagged and produce a distorted image space.

Meanwhile, the design that uses a mirror at the edge of the frame simply using a mirror with a thickness of 3 millimeters. This is due to come to hold the position of the mirror frame. If you want to use a piece of mirror is arranged in the form of a puzzle, you can use a thickness of 3 millimeters to the size of about 30 cm x 30 cm.

Use a uniform thickness when using a small mirror pieces are arranged on one area of the wall, so that flat wall display.

Designing the interior in a small house is tricky. His house is small but the activity and the need remains the same, starting from waking up until going to sleep again. Room size was made according to need, all calculated fit no more, even sometimes the room is somewhat narrowed. So take the surefire strategy for selecting furniture.

But do not worry, with a tiny room that can be presented all the furniture as needed. Such as planning the children’s bedroom furniture, some furniture can be used as a single function, such as a bunk bed and the bottom there are the drawers to put folded clothes. Likewise for a desk, you can create a list of items to be placed on the desks.

Moreover, your son or daughter has a favorite item that you want to display, and then you can plan it on the desks. Keep in mind in planning the furniture, but also the needs of users, size and material. Think back to buy ready-made furniture, usually does not fit in existing space.

The mass manufacture of furniture does not make it exclusive, meaning that the shape and size of the furniture of this type are easily obtained using the standard that is expected to occupy any room size. This type of furniture is not bad, but less appropriate for a small house that needs telling finesse.

1. Compact, some functions can be used as furniture, furniture that is compact. For that you can plan the function of furniture that will be one, and needs to be accommodated on the furniture.

2. Physical security, planning of furniture to think about user security. For example a desk height adjusted to the wearer, not to a desk that is too high will result in your son or daughter falls.

3. Convenience, ready-made furniture should be comfortable to use. For example a child study table, a corner and made of sharp material. In addition to discomfort is also not safe to use by children.

4. Size, the furniture according to the size of the existing space, this furniture is usually booked, so the size of the furniture of the room should be considered. Less precise measurements, will lead to disappointment and even redundant, because the furniture completely unusable.

5. Material is durable, long lasting furniture material if there is proper use of material specifications. For example the use of heat-resistant material used on table top kitchen set.

6. The material is safe from harmful chemicals; some materials contain chemicals hazardous to health, especially for children. Offers material of the furniture workshop, considered and studied first. Better a little bit expensive but it is safe for health and long-lasting.

7. Supervision, of the furniture that would neatly provide good satisfaction to you as a buyer and also the owner of the workshop. You can immediately see the manufacturing process at the workshop, make sure the furniture is done properly.